Design made in Italy – Stainless steel 316 L
Aluminium AW-2011 – CNC Tecnology
Wight: 538 g – Load: 20 kg
Wheel: 26″ / 28″
SOLIDLY ANCHORED TO THE FRAME
Thanks to the S sleeves, which adapt perfectly to the geometries of your frame, you can fix the BAC Rack-RH rear carrier diretly to your bicycle, without the help of fixing tubes.
The BAC Rack-RH rear carrier will therefore be perfectly joined to the frame,generating with it a rigid static ring (fig. 1).
The triangle will also act as a barrier between the bags and the spokes of the wheel.
SOLIDLY ANCHORED TO THE FRAME
Thanks to the S sleeves, which adapt perfectly to the geometries of your frame, you can fix the BAC Rack-RH rear carrier diretly to your bicycle, without the help of fixing tubes.
The BAC Rack-RH rear carrier will therefore be perfectly joined to the frame,generating with it a rigid static ring (fig. 1).
The triangle will also act as a barrier between the bags and the spokes of the wheel.
A steel cable, represented schematically in the photo below with the orange line, limits the telescopic extension of the horizontal tube/sleeve system, to avoid incorrect assembly and keeps the rear rack attached to the frame in the case of yielding.
A steel cable, represented schematically in the photo below with the orange line, limits the telescopic extension of the horizontal tube/sleeve system, to avoid incorrect assembly and keeps the rear rack attached to the frame in the case of yielding.
Each BAC-Rach-RH kit is sold together with clamps which guarantee that the rack is mounted correctly according to the specificities of your bicycle.
AUTOMATIC CONFIGURATOR: this will select for you which kit to buy depending on the model of the bicycle shown.
If the model of your bicycle is not shown in the list,, and for all custom-made artisanal bikes, use the MANUAL CONFIGURATORS:
The sheets below will guide you in choosing the correct manual configurator: two are for frame ready for fitting racks; two solve problems of mounting on frame not ready.
Each BAC-Rach-RH kit is sold together with clamps which guarantee that the rack is mounted correctly according to the specificities of your bicycle.
AUTOMATIC CONFIGURATOR: this will select for you which kit to buy depending on the model of the bicycle shown.
If the model of your bicycle is not shown in the list,, and for all custom-made artisanal bikes, use the MANUAL CONFIGURATORS:
The sheets below will guide you in choosing the correct manual configurator: two are for frame ready for fitting racks; two solve problems of mounting on frame not ready.
For all those bicycles which have specific threaded eyeholes for mounting racks.
For bikes prepared for mounting racks, only if with post mount disc brake (for flat mount disc brakes use the above configurator).
To correctly configure the kits with: low clamps for quick release and bracelet clamps for blocking the top of the rack.
To correctly configure the kits with: low clamps for 10 mm threaded wheel axle (blocking the wheel thanks to nuts) and bracelet clamps for blocking the top of the rack.