Design made in Italy – Stainless steel 316 L
Aluminium AW-2011 – CNC Technology
Weight: 538 g – Load: 20 kg
Wheel: 26″ / 28″
EASILY ADAPTABLE
EASILY ADAPTABLE
SOLIDLY ANCHORED TO THE FRAME
Thanks to the S sleeves, which adapt perfectly to the geometries of your frame, you can fix the BAC Rack-RH rear carrier directly to your bicycle, without the help of fixing tubes.
The BAC Rack-RH rear carrier will therefore be perfectly joined to the frame, generating with it a rigid static ring (fig. 1).
The triangle will also act as a barrier between the bags and the spokes of the wheel.
SOLIDLY ANCHORED TO THE FRAME
Thanks to the S sleeves, which adapt perfectly to the geometries of your frame, you can fix the BAC Rack-RH rear carrier directly to your bicycle, without the help of fixing tubes.
The BAC Rack-RH rear carrier will therefore be perfectly joined to the frame, generating with it a rigid static ring (fig. 1).
The triangle will also act as a barrier between the bags and the spokes of the wheel.
TRAVEL SAFELY
Safety system
A steel cable, represented schematically in the photo below with the orange line, limits the telescopic extension of the horizontal tube/sleeve system, to avoid incorrect assembly and keeps the rear rack attached to the frame in the case of yielding.
TRAVEL SAFELY
Safety system
A steel cable, represented schematically in the photo below with the orange line, limits the telescopic extension of the horizontal tube/sleeve system, to avoid incorrect assembly and keeps the rear rack attached to the frame in the case of yielding.
THE CONFIGURATORS
Choose the correct brackets kit for your bike
Each BAC-Rach-RH kit is sold together with brackets which guarantee that the rack is mounted correctly according to the specificities of your bicycle.
AUTOMATIC CONFIGURATOR: this will select for you which kit to buy depending on the model of the bicycle shown.
If the model of your bicycle is not shown in the list, and for all custom-made artisanal bikes, use the MANUAL CONFIGURATORS:
The sheets below will guide you in choosing the correct manual configurator: two are for frame ready 
for fitting racks; to solve problems of mounting on frame not ready.
THE CONFIGURATORS
Choose the correct brackets kit for your bike
Each BAC-Rach-RH kit is sold together with brackets which guarantee that the rack is mounted correctly according to the specificities of your bicycle.
AUTOMATIC CONFIGURATOR: this will select for you which kit to buy depending on the model of the bicycle shown.
If the model of your bicycle is not shown in the list, and for all custom-made artisanal bikes, use the MANUAL CONFIGURATORS:
The pages below will guide you in choosing the correct manual configurator: two are for frames ready for fitting racks; to solve problems of mounting on frames not ready.
FOR BIKES READY
For all those bicycles which have specific threaded eyeholes for mounting racks.
FOR BIKES WITH POST MOUNT DISC BRAKE
For bikes prepared for mounting racks, only if with post mount disc brake (for flat mount disc brakes use the above configurator).
FOR BIKES THAT ARE NOT FITTED FOR INSTALLATION WITH QUICK RELEASE WHEELS
To correctly configure the kits with: low clamps for quick release and bracelet clamps for blocking the top of the rack.
FOR BIKES THAT ARE NOT FITTED FOR INSTALLATION WITH WHEELS WITH A 10 MM AXLE
To correctly configure the kits with: low clamps for 10 mm threaded wheel axle (blocking the wheel thanks to nuts) and bracelet clamps for blocking the top of the rack.
FOR BIKES READY
For all those bicycles which have specific threaded eyeholes for mounting racks.
FOR BIKES WITH POST MOUNT DISC BRAKE
For bikes prepared for mounting racks, only if with post mount disc brake (for flat mount disc brakes use the above configurator).
FOR BIKES THAT ARE NOT FITTED FOR INSTALLATION WITH QUICK RELEASE WHEELS
To correctly configure the kits with: low clamps for quick release and bracelet clamps for blocking the top of the rack.
FOR BIKES THAT ARE NOT FITTED FOR INSTALLATION WITH WHEELS WITH A 10 MM AXLE
To correctly configure the kits with: low clamps for 10 mm threaded wheel axle (blocking the wheel thanks to nuts) and bracelet clamps for blocking the top of the rack.